phone: 01225 312177 fax: 01225 333304

Warrior CUT 100C 3 Phase Plasma Cutter

3 Phase 415V Input,
Complete with Trafimet Torch, 5m SY Mains Cable, 5m Air Hose, 3 YEARS WARRANTY
Only £1245 plus VAT

The Warrior Cut100C fitted with a Trafimet Torch Cuts 28mm cleanly, as you can see in the photographs.

The Warrior CUT100C plasma cutting system uses an inverter power supply to provide a smooth DC output voltage producing excellent cut and gouge quality on mild steel, stainless steel, aluminum and other metals.
Air is the primary plasma gas, providing low operating cost combined with high-speed performance. Cylinder air or shop air can be used as long as it is clean, dry and oil-free. When properly set and maintained, the pressure regulator and gas filter on the power unit ensure that the correct pressure and flow rate is supplied to the system at the proper quantity and quality. The Warrior CUT100C can also cut with nitrogen when extended electrode life is a priority.
The CUT100C also features a remote control socket, and digital display of the preset current

The following consumables are available for the unit:
Electrode £4.05 + VAT
Swirl Ring £9.57 + VAT
TIPS £4.42 + VAT
Outer Shroud £18.69 + VAT
Standoff Guide £3.00 + VAT