phone: 01225 312177 fax: 01225 333304

Warrior CUT 40 Single Phase Plasma Cutter

The Warrior CUT40 is a highly portable, 240V mains powered plasma cutter which makes cutting steel up to 10mm thick as easy as using a pair of scissors to cut paper. For normal use will run off a 13A 240V supply.
Supplied with a shoulder strap to easily carry to the workpiece, it provides a powerful cutting capability in a small package. Complete with Carrying Strap, 5m ZipCut40 Torch, 5m Air Hose, 3 YEARS WARRANTY

Only £550.00 plus VAT

The Warrior Cut40 cuts 10mm steel cleanly, as you can see in the photographs. The Warrior CUT40 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage producing excellent cut and gouge quality on mild steel, stainless steel, aluminium and other metals.
Air is the primary plasma gas, providing low operating cost combined with high-speed performance. Cylinder air or shop air can be used as long as it is clean, dry and oil-free. When properly set and maintained, the pressure regulator and gas filter on the power unit ensure that the correct pressure and flow rate is supplied to the system at the proper quantity and quality. The Warrior CUT40 can also cut with nitrogen when extended electrode life is a priority.
Specifications
Input Power 240V @ 50Hz 4.8kVA
Current range 20-38A
Output voltage 96V
Duty cycle 38A @ 60%
Efficiency 85%
Power factor 0.93
Arc-starting - touch
weight 8.6kg
dimensions:
376 x 172 x 304 mm (l x w x h)
Cutting thickness 10mm