Warrior 250 Single Phase Inverter MIG

WARRIOR INVERTER MIG
240 Volts, high quality inverter MIG WelderHighly Portable, can handle 0.6, 0.8, 1.0 and 1.2 wireWeighs 33kg (5kg spool MIG wire)20-250 amps for over 3ft of continuous weld, 200amps for 6ftStepless power controlVariable spatter control (inductance)Soft Start, very good on aluminium (very low spatter)Digital read out (volts/amps)Complete with torch, wire, reg and earth
£850.00 + VAT

download brochure

Gasless Welding using Flux Shielding Wire

One of our Warrior owners, Nick O'Donnell, has been experimenting with Flux Wire. He tells us that he has had excellent results using Hobart Fabshield XLR8 1.7mm diameter wire on 10mm plate with an MB36 Torch. He says the flux peels off to reveal a good flat weld.
If you are interested ask for the special drive rollers.

Insert body text here ...

First two photos are 30 foot Aluminium Pontoons, with a continuous full length weld.
The last four pictures show digger buckets welded using a Warrior MIG.

A Warrior MIG Welder being used with a line boring machine. The worn hinges on a digger bucket are filled using a spiral weld applied automatically. This represents 36 feet of continuous automatic weld for each layer on each end of the hinge. The resultant weld is then bored out to provide a precision fit for the hinge. This is a demonstration of the duty cycle of the Warrior MIG welder.